TC-950 3/4 Ton Manual Hot Stamping Branding Machine
This versatile toggle design stamping machine has a 2 x 3 inch (60 x 90mm) stamping area and 3/4 ton of pressure (700kg). This machine comes with a mechanically gear driven foil feed assembly for a variety of applications using hot stamping foil. Along with foil stamping capabilities, the TC-950 has a heat capacity of 300 watts which allows clean, crisp, foil stamping, embossing and debossing applications.
The stamping is hinge attached at the rear base of the machine allowing the head to be raised to a 45 degree angle. This allows more than adequate clearance for placement of parts. The feed assembly is activated when raising the stamping head. Independent leveling adjustments at each corner of the worktable along with fine pressure adjustments at the top of the stamping head give a clean quality impression.
Machine Specifications
Model | TC-950 |
Size of Hot Plate | 2.4" x 3.5" (60 x 90mm) |
Work Table Size | 4" x 6" (100 x 150mm) |
Max. Pressure | 1,300 lbs. (600 Kg.) |
Max. Head Stroke | 0.4 - 0.8 inches (10 - 20 mm) |
Max. Opening (flat) | 1.18" (30 mm) |
Voltage Supply | 110v / 220v / 240v |
Heater Capacity | 300 W |
Foil Controller | Mechanism |
Thermo Controller | 0 - 390 degrees F (0 - 200 C) |
Net Weight | 44 lbs. (20 Kg.) |
Gross Weight | 48.5 lbs. (22 Kg.) |
Dimensions (LxWxH) | 11x9.5x13.5" (280x240x340mm) |